Chevrolet 2002 Venture Owner'S Manual Download

Page: 194 / 486

2-86

After repositioning the crossrails, be sure to tighten the
release knobs by turning them clockwise. This will lock
the crossrails in place.

Use the tie

down loops on

the slider to help secure
large loads.

Sun Visors

To block out glare, you can swing down the visors. You
can also remove them from the center mount and swing
them to the side.

Visor Vanity Mirrors

Pull down the sun visor. Flip up the cover to expose the
vanity mirror.

Lighted Visor Vanity Mirrors (If Equipped)

Pull down the sun visor. Flip up the cover to expose the
vanity mirror. The lamps will come on when you open
the cover.

Summary of Contents for 2002 Venture






































































































































































































































































































































































































































































































Search results

Summary of Contents for 2002 Venture

Reviews:

Related manuals for 2002 Venture

Brands by name

Popular brands

Chevrolet 2002 Venture, Owner'S Manual

Search results

Summary of Contents for 2002 Venture

Reviews:

Related manuals for 2002 Venture

Brands by name

Popular brands