manualshive.com logo in svg

Chevrolet 2002 Venture, Owner'S Manual

Share
Download
Chevrolet 2002 Venture Owner'S Manual Download Page 81

1-75

12. Pull the shoulder harness adjustment strap (C)

firmly until the harness is snugly adjusted around
the child. You should not be able to put more than
two fingers between the harness and the child’s
chest. Make sure the harness and buckle strap are
not twisted.

13. Adjust the position of the harness on the child’s

shoulder by moving the clip along the harness until
it is level with the child’s armpits. On each side of
the harness, the shoulder part should be centered on
the child’s shoulder. The harness should be away
from the child’s face and neck, but not falling from
the child’s shoulders.

If you expect that the child will sleep while riding,
you can recline the seatback. See “Seats” in 
the Index.

Summary of Contents for 2002 Venture







































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands