manualshive.com logo in svg

Chevrolet 2002 Venture, Owner'S Manual

Share
Download
Chevrolet 2002 Venture Owner'S Manual Download Page 91

1-85

Third Row (Stowable Seat)

The anchor bar for the stowable bench seat is located on
the passenger’s side of the crossbar. Use the center
seating position to use the anchor properly. If the
convenience center is in the vehicle, you must lift the
tray sill to use the anchor. See “Convenience Center” in
the Index for more information.

Lower Anchorages and Top Tethers for
Children (LATCH System)

Your vehicle has the LATCH system. You’ll find
anchors (A) in the second row outboard bucket seats, the
40 side of the 60/40 split bench seat and both second
row captain’s chairs.

To assist you in locating the lower anchors for this child
restraint system, each seating position with the LATCH
system will have a grey dot on the seatback or you will
see the latches between the seatback and cushion.

Summary of Contents for 2002 Venture







































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands