manualshive.com logo in svg

Chevrolet 2002 Venture, Owner'S Manual

Share
Download
Chevrolet 2002 Venture Owner'S Manual Download Page 126

2-18

Entering Programming Mode

To program features, your vehicle must be in the
programming mode. Follow these steps:

1. The optional content theft

-

deterrent system must be

disarmed. See “Content Theft

-

Deterrent System” in

this section.

2. Remove the BCM PRGRM fuse from the instrument

panel fuse block, located to the right of the glove
box. See “Fuses and Circuit Breakers” in the Index.

3. Close the driver’s door.

4. Turn the ignition key to ACCESSORY.

5. Count the number of chimes you hear. You will 

hear two to four chimes depending on the features
your vehicle is equipped with. Refer to the chart
shown previously.

You can now program your choices.

To exit the programming mode, follow the steps 
listed under “Exiting Programming Mode” later in 
this section.

Delayed Illumination and Exit Lighting

This feature allows you to customize the interior lamps
when entering and exiting the vehicle.

Programmable Modes

Mode 1: Both Features Off (The interior lamps will 
turn on or off at the same instant that a door is opened 
or closed.)

Mode 2: Delayed Illumination Only (The interior lamps
will stay on for about 25 seconds after all the doors and
liftgate are closed, or until you lock the doors.)

Mode 3: Exit Lighting Only (The interior lamps will
come on whenever you remove the key from the ignition
and stay on for about 25 seconds, or until you lock 
the doors.)

Mode 4: Both Features On (This combines 
Modes 2 and 3.)

Summary of Contents for 2002 Venture







































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands