manualshive.com logo in svg

Chevrolet 2002 Venture, Owner'S Manual

Share
Download
Chevrolet 2002 Venture Owner'S Manual Download Page 413

6-41

7. To reinstall the lamp assembly, line up and insert the

tabs on the back of the assembly in the slots in the
fender. Engage the lower clip on the back of the
lamp assembly into the fender, keeping the upper tab
on the front turn signal/parking lamp assembly
inboard of the headlamp bracket tab.

8. To align the front turn signal/parking lamp assembly

with the headlamp assembly, lift up the front turn
signal/parking lamp assembly until the upper edge is
contacting the fender.

9. Fasten the front turn signal/parking lamp assembly to

the headlamp assembly with the thumbscrew
removed in Step 2.

Summary of Contents for 2002 Venture







































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands