Chevrolet 2002 Venture, Owner'S Manual

Page: 127 / 486

2-19
Before your vehicle was shipped from the factory, it
was programmed to one of the modes listed previously.
To determine the mode your vehicle is programmed
to or to program your vehicle to a different mode, do
the following:
1. Follow the instructions for “Entering Programming
Mode” listed previously.
2. Turn the interior lamps on by turning the instrument
panel brightness control all the way up.
3. Count the number of chimes you hear. The number
of chimes indicates the vehicle’s current
programmed mode. (If you do not wish to change the
current mode, you can either exit the programming
mode by following the instructions later in this
section or program the next feature available on
your vehicle.)
4. Turn the interior lamps control off to change the
current mode.
5. Turn the interior lamps control from on to off until
you hear the number of chimes corresponding to the
mode selection you want.
The mode you selected is now set. You can either exit
the programming mode by following the instructions
later in this section or program the next feature available
on your vehicle.
Automatic Door Locks
This feature allows you to customize the automatic
locking and unlocking of the doors using the gearshift.
Programmable Modes
Mode 1: Both Features Off (Automatic door locking
and unlocking is disabled. You will always need to
lock your doors manually before driving to increase
occupant safety.)
Mode 2: Automatic Door Locking Only
D The automatic door unlock feature is turned off.
D Shift out of PARK (P) with the ignition on and the
driver’s door closed; all doors will lock automatically.
Mode 3: Automatic Unlocking with the Ignition Off
D Turn off the ignition with the transaxle in PARK (P);
all doors will unlock automatically.
D Shift out of PARK (P) with the ignition on and the
driver’s door closed; all doors will lock automatically.