manualshive.com logo in svg

Chevrolet 2002 Venture, Owner'S Manual

Share
Download
Chevrolet 2002 Venture Owner'S Manual Download Page 128

2-20

Mode 4: Automatic Unlocking with Transaxle 
in PARK (P)
D Shift into PARK (P) with the ignition on; all doors

will unlock automatically.

D Shift out of PARK (P) with the ignition on and the

driver’s door closed; all doors will lock automatically.

Before your vehicle was shipped from the factory, it was
programmed in Mode 3. The mode to which the vehicle
was programmed may have been changed since it left
the factory. To determine the mode to which your
vehicle is programmed or to program your vehicle to a
different mode, do the following:

1. Follow the instructions for “Entering Programming

Mode” listed previously.

2. Press LOCK on the power door lock switch.

3. Count the number of chimes you hear. The number

of chimes indicates the vehicle’s current
programmed mode. (If you do not wish to change the
current mode, you can either exit the programming
mode by following the instructions later in this
section or program the next feature available on 
your vehicle.)

4. Press LOCK to change the current mode.

5. Press LOCK until you hear the number of chimes

corresponding to the mode selection you want.

The mode you selected is now set. You can either exit
the programming mode by following the instructions
later in this section or program the next feature available
on your vehicle.

Last Door Closed Locking and Lockout
Prevention

This feature allows you to customize the automatic
locking of the doors when exiting the vehicle.

Programmable Modes

Mode 1: Both Features Off (Doors will always lock
immediately when you press LOCK on the power 
door lock switch or the optional remote keyless 
entry transmitter.)

Mode 2: Lockout Deterrent Only (If you leave your key
in the ignition with the driver’s door open, you won’t be
able to lock the doors with the power door locks.)

Summary of Contents for 2002 Venture







































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands