Chevrolet 10 series 1973, Overhaul Manual

Page: 374 / 522

A U T O M A T IC T R A N S M IS S IO N 7A-71
Fig. 33T~Removing Center Support Bolt
12. Remove intermediate clutch backing plate, three (3)
composition, and three (3) steel clutch plates (fig.
34T).
13. Remove intermediate clutch plates.
a. (All except CY Model) Remove three (3)
composition, three (3) steel clutch plates and one
waved steel plate.
b. (CY Model) Remove two (2) composition and
three (3) steel clutch plates.
14. Remove center support to case retaining snap ring
(fig. 35T).
15. Remove entire gear unit assembly by lifting with
gear assembly installing and removing Holding
Tool J-21795 with J-9539 slide hammer (fig. 36T).
Fig. 34T~Removing Intermediate Backing Plate and
Clutch Plates
Fig. 35T-Rem oving Center Support to Case Retaining
Snap Ring
Fig. 36T-Rem oving Center Support and Gear Unit
from Case
OVERHAUL MANUAL