Chevrolet 10 series 1973, Overhaul Manual

Page: 401 / 522

7 A - 9 8 A U T O M A T IC T R A N S M IS S IO N
CLUTCH INNER SEAL
Fig. 100T-Installing Intermediate Clutch Inner Seal
CLUTCH OUTER SEAL
Fig. 101T-Installing Intermediate Clutch Outer Seal
Inspection of Reaction Carrier, Roller
Clutch, and Output Carrier Assembly
1. Inspect band surface on reaction carrier for signs of
burning or scoring.
2. Inspect roller clutch outer race for scoring or wear.
3. Inspect thrust washer surfaces for signs of scoring
or wear.
Fig. 102T-Installing Intermediate Clutch Piston
INTERMEDIATE CLUTCH
SPRING GUIDE
Fig. 102TA— Installing Intermediate Clutch Spring
Guide
4. Inspect bushing for damage. If bushing is damaged,
reaction carrier must be replaced.
5. Inspect reaction carrier pinions for damage, rough
bearings, or excessive tilt.
6. Check pinion end play. Pinion end play should be
,009"-.024" (fig. 105T).
7. Inspect roller clutch for damaged rollers.
8. Inspect roller clutch cage and springs for damage.
9. Inspect front internal gear (output carrier) for
damaged teeth.
O VERHAUL M A NUAL