Chevrolet 10 series 1973, Overhaul Manual

Page: 482 / 522

SPECIFICATIONS 23
TORQUE C H A R T (CONT'D)
Components
Chevrolet
Chevelle
&
Monte Carlo
Nova Camaro Corvette
Turn Signal Switch
Screws
25 lbs. in.
Column Lock Plate
Cover Screws
20 lbs. in.
Turn Signal Housing
Screws
45 lbs. in.
Lock Bolt Spring
Screw (T ilt and
Tilt-Telescope)
35 lbs. in.
Bearing Housing
Support Screws
T ilt & Tilt-Telescope)
60 lbs. in.
Trans. Control Lock
Tube Hsg. Ext.
Screws (Tilt-Telescope)
-
- - -
40 lbs. in.
Power Steering
Pump Pulley Nut
55 lbs. ft.
Power Steering Pump
Mounting Bolts
24 lbs. ft.
Power Steering Pump
Mounting Stud Nut
25 lbs. ft.
Power Steering Pump
Return Hose Clamp
Screw
26 lbs. in.
15 lbs. in.
.
Power Steering Pump
& Gear Hose Fittings
25 lbs. ft.
Power Cylinder to
Relay Rod Nut
-
- -
-
45 lbs. f t . t t
Power Cylinder to
Frame Bracket
- -
- -
23 lbs. f t . t t
Power Cylinder Frame
Bracket to Frame Nuts
- - -
-
17 lbs. ft.
Control Valve to
Pitman Arm
-
-
- -
45 lbs. f t . t t
Control Valve
Clamp Bolt
-
- -
-
25 lbs. ft.
* Plus additional torque required to align castellation with cotter pin hole in stud (not to exceed 55 lbs. ft. maximum).
* * Plus additional torque required to align castellation with cotter pin hole in stud (not to exceed 50 lbs. ft. maximum).
t Plus additional torque required to align castellation with cotter pin hole in stud (not to exceed 85 lbs. ft. maximum),
t t Plus additional torque required to align castellation with cotter pin hole.
OVERHAUL MANUAL