
Emergency Procedures
81
Reinstall the lampshade in the mounting
hole on the lamp housing.
Luggage Boot Lamp Bulb
M ounting position: Install it in the middle
of luggage boot.
1.
Insert a screwdriver in the gap
between the lamp housing and
lampshade, take out the lampshade
carefully.
2.
Replace the bulb.
3.
Reinstall the lampshade in the
mounting hole on the lamp housing.
Regulate the Beam of
Headlamp
The adjustment of headlamp beam
whether proper has direct relation with
driving safety. Therefore, only special
instrument is allowed to use for regulating
the beam. Please follow law and rules
concerned during adjustment.
Fuse & Relay
Use the new fuse with the same rated
value instead of the failed one. The
position of fuse box containing main fuse
and relay is shown in the figure.
Professional knowledge is required to
replace the relay.
Carrying several spare fuses in the vehicle
is suggested in order to prevent
unexpected event.
Fuses with various specifications are
available in Chery’s special service
station.
The fuse burnt can be identified by using
the fuse disconnection method.
All fuses are push-on type.
Fuse
Fuse color code
Color
Ampere
Tan
5
Brown
7.5
Red
10
Blue
15
Yellow
20
Shut down the ignition switch
and all electrical equipment before
replacement of fuse and relay.
Summary of Contents for RIICH 2 series
