Chery RIICH 2 series, User Manual, Page: 48 / 141

Operation & Adjustment of Inside Devices
39
−
Under CD mode, it is programming
memory of CD. Press the key for 2s
when playing CD, save a
programming song and the display
shows [P.XX] (the range for XX is
1-10) that flickers for 5s, press the key
again during flickering to confirm the
programming song has been saved.
Repeat the above process to save next
song, return to normal play state after
confirmation. When the CD songs of
which are saved is out, the content for
programming memory will
automatically eliminate.
⑾
Preset key 6:
−
Under radio mode, it is presetter No.6;
−
Under CD mode, it is CD
programming play. Press the key when
playing CD, the machine will play
from the saved song P1 if there are
saved songs. Press the key
④
“
∨
”,
“
∧
”, convert to next saved song.
Press the key again to cancel the
programming play function and return
to normal play order.
⑿
MODE key: signal selection switch,
which may convert between
radio/CD.
⒀
BAND key: Wave band conversion
switch.
⒁
Auto-scan memory key:
−
Press the key 2s, the machine will scan
the whole band from high frequency to
lower and save the channels with
stronger frequency in 1-6 presetters,
and finally stop at the channel saved in
presetter No. 6;
−
Under CD mode, it is the
programming elimination of CD. Press
the key 2s to clear programmed songs
and LCD shows [CLR], which flicker
for 5s. Press the key again in the
flickering period to confirm that the
programmed son gs have been cleared,
and then return to normal play state. If
no any operation is taken in the period,
it returns to programming play state.
⒂
Auto-scan key:
−
Slightly press the key and the radio
searches channels from high frequency
to lower automatically. When a
channel is searched, LCD flickers the
frequency of the channel for 5s, and
then automatically search other
channels.
−
When a frequency is flickering, long
time press the preset key to save the
channel in corresponding presetter.
Basic operation of radio
Preparation
−
Slightly press the key POWER
①
,
turn on the power supply and LCD
shows digits.
−
Slightly press AM /FM switch to select
suitable wave length. LCD shows AM
or FM .
Auto-tune
−
Slightly press the key “
∧
”TUNE
④
,
the radio searches channels from high
frequency to low;