
Safety
65
Draw back the release rod at the lower left
part of dashboard to open the filler cap of
fuel tank. The fuel filler cap is located in
the lower part between front left door and
left sliding door.
As shown in the figure above, open the
fuel filler cap and unscrew the fuel tank
cover to refill. A click shall be heard when
screwing the fuel tank cover.
Open Engine Bonnet
1.
The handle of engine bonnet is located
in the lower left part of dashboard,
pull back the handle and the bonnet
will pop up a certain height.
2.
Stand in front of the vehicle, stretch
your hand from the lower part of front
engine bonnet, you can touch the
engine bonnet handle, push the handle
upward and draw the bonnet up, draw
back the release rod and unlock the
engine compartment cover.
3.
Lift the engine compartment cover and
support it by the support rod.
4.
Fall the engine bonnet down to the
place 20-30cm away from the bonnet
lock first when closing the engine
bonnet, and then let it freely drop in
the lock claw for close.
5.
Lifting the bonnet is required after the
engine bonnet is closed to conform it
whether matched will the lock
completely.
行驶时发动机舱盖必须
牢牢关住。如果行驶中发现发
动机舱盖没有关牢,应立即停
The engine bonnet must be
closed firmly during driving. Stop
the car immediately and close the
bonnet if it finds that the engine
bonnet is not closed firmly during
driving.
Summary of Contents for RIICH 2 series
