
Quality Warranty Service
119
engine oil in service will be gradually
contaminated, corroded or degenerated. So
if the oil continues in service for a long
time, it may burn out the engine. And such
defects due to the shortage of proper
examination and maintenance, Chery will
not be liable for the warranty service.
The instruction manual specifies the
necessary maintenance items. After such
items are executed, please record the
results in the manual, and keep it carefully.
When accepting warranty service, you
must bring forth the manual.
5)
Severe defects result from the
problems that owner should have
discovered and handled, but ignored.
Note: Fox example, although it has been
found that engine oil alarm lamp gives a
warning, or the driver feels something
abnormal (noise, vibration), the vehicle
has not been overhauled in time during
routine inspection. And it continues in
service and makes failures worse.
6)
Defects caused by the use of products
other than the genuine spare parts and
specified grease (includ ing engine oil,
brake fluid, transmission oil, and fuel).
Note: The prerequisite for the warranty is
to properly use the genuine spare parts and
specified grease so as to ensure the normal
operation of the vehicle. So, if the
non-genuine spare parts are used, or they
are genuine spare parts, but not applicable
to the vehicle, or the grease not specified
in the manual is employed, all of these
may influence the vehicle’s original
performance and decreases its durability.
For example, the oil cleaner not specified
by Chery is utilized and then it leads to the
cleaner jammed and the bearing burnt.
7)
Defects caused by the malfunction of
the vehicle and improper use of the
M anual or the overuse of the vehicle
that exceeds the vehicle’s capabilities
specified in the specification (the
vehicle travels as a racing vehicle with
the overload, the engine overload,
excessive loading capacity, passenger
overload, excessive driving speed,
etc).
Note: The malfunction of the vehicle and
improper use of the M anual or the overuse
of the vehicle that exceeds the vehicle’s
capabilities specified in the specification
are mainly as follows:
Fox example:
Defects due to driving in harsh area or
racing.
Overloading or excessively pressing
chassis spring.
Engine failure caused by the operation
with overload, and the excess of the
transmission limit specified in the manua l
when the vehicle travels at high speed.
2.
The following symptoms will not be
deemed as defects with the warranty.
1)
The symptoms caused by the wear or
the long period of service. (Natural
fading or degeneration of painted
surface, plating surface, resin parts,
etc.)
Note: Among parts consisting of an
automobile, some of them (e.g. clutch disc)
are subject to be continuously worn with
the driving and repeated operation.
In addition, the brake lining and other
parts which fulfill their functions by
wearing themselves, those consumptive
parts for daily running and the grease such
as engine oil or coolant which plays the
role of lubricating and cooling, will be
Summary of Contents for RIICH 2 series
