Chattanooga Vectra Neo, User Manual

Page: 24 / 86

22
Vectra® Neo Clinical Therapy System
SETUP INSTRUCTIONS
The Neo Cart is shipped without the legs attached.
Tools Required:
• 3/16” Hex Key Wrench (provided)
• Flat Washer ¼” Internal diameter, quantity 6 (provided)
• Socket Head Cap Screw ¼-20 x 1-1/4”, quantity 6
(provided)
To install or adjust the leg assemblies onto the Neo Cart,
follow these steps:
1. Remove the bottom drawer from the Cart. Pull the
drawer open. Press the plastic tabs on both drawer
slides simultaneously in opposite directions, as shown.
Completely pull the drawer out.
2. There are two Cart height adjustments. Standard
shown on the left and lowered, shown on the right.
For initial installation, determine the desired height.
Locate three Allen-style bolts for each leg, left and
right and insert, by hand, in their respective slots. Use
the Allen wrench to secure the legs.
NOTE: To adjust height at a later time, simply remove
the Allen-style bolts, re-position the legs, and re-insert
the bolts.
3. Reinstall the Bottom Drawer.
NEO LEG TO CART ASSEMBLY/ADJUSTMENT