Chattanooga Vectra Neo, User Manual

Page: 49 / 86

47
Vectra® Neo Clinical Therapy System
CPS (CLINICAL PROTOCOL SETUP)
The Vectra® Neo Clinical Therapy System has a Clinical
Protocol Setup (CPS) icon that is a series of protocol
presets where the Body Area, Clinical Indication,
Pathological Condition, and Pathological Severity are
selected by the user to assist in selecting the parameter
setting. These Clinical Protocols are to be used only as
guidelines. Each patient should be individually assessed to
determine the appropriateness of the protocol parameters
prior to use.
The following information gives general instructions to
access, select, and set up Clinical Protocols. Each Clinical
Protocol is set up and edited in the same basic manner.
1. Select CPS from the Home screen.
2. Touch the body part you wish to treat.
3. Using the Up and Down Arrows, scroll to the
appropriate indication and select by pressing the “√”
icon.
4. Using the Up and Down Arrows, scroll to the
appropriate condition you wish to treat and select by
pressing the “√” icon.
5. Select the modality desired.
6. Begin therapy by pressing the Start button or make
setting changes pressing the Customize icon.
7. To save the customized protocol, press the Save icon.
8. Save a new protocol by pressing the Save as a New
Name icon and typing in a name for the protocol.
Press the Save icon when finished.
DEVICE USER INTERFACE
9. Overwrite a previously saved protocol by using the Up
and Down arrows or Previous Page/Next Page icons to
select the protocol to overwrite. Press the Save icon to
save the overwritten icon.
10. Return to Home screen by pressing the Home icon.
Press the Back arrow to scroll back one screen.