Chattanooga Vectra Neo User Manual Download Page 51

Page: 51 / 86

Vectra® Neo Clinical Therapy System

DEVICE USER INTERFACE

ELECTROTHERAPY OPERATION (CONTINUED)

5. If desired, connect optional Remote Control to device.

6. Use the Intensity dial to set therapy intensity:

• Clockwise - Increases Intensity

• Counterclockwise - Decreases Intensity

7. Press the Start button to begin therapy, the Pause

button to pause treatment, or the Stop button to
terminate the treatment.

NOTE:

To make setting adjustments during therapy,

press the Customize icon or adjust intensity using the
intensity knob.

8. When treatment has completed, the Treatment

Summary screen will appear with the following
options:

• Save therapy information to a USB flash drive by

inserting a USB flash drive into the device and
pressing the Save to USB Flash Drive icon.

• Repeat the treatment by pressing the Run this

Treatment icon.

• Save the treatment protocol by pressing the Save

Protocol icon. Refer to the CUSTOM PROTOCOLS
section on page 59 for detailed instructions on
customized settings.

Summary of Contents for Vectra Neo























































































Search results

Summary of Contents for Vectra Neo

Reviews:

Related manuals for Vectra Neo

Brands by name

Popular brands

Chattanooga Vectra Neo, User Manual

Search results

Summary of Contents for Vectra Neo

Reviews:

Related manuals for Vectra Neo

Brands by name

Popular brands