Chattanooga Intelect RPW 2, User Manual

Page: 74 / 95

74
V-ACTOR HF HANDPIECE OPERATIONS, SET-UP, CLEANING, AND MAINTENANCE EN
INTELECT
®
RPW 2 USER MANUAL
TROUBLE-SHOOTING
ACCESSORIES AND SPARE PARTS
TECHNICAL SPECIFICATIONS
Subject to technical changes
Note: In the event of the medical product being transferred to third parties, the following must be observed:
– The complete device documentation must be delivered together with the medical product.
– The medical product may only be exported to a foreign country if the medical product and the corresponding indications are allowed there.
This device complies with the applicable standards.
For information about conformity with directives, please refer to the separate operating manual for your control device.
*V-Actor is a registered trade mark of Storz medical AG
Fault description Possible cause Corrective actions
No compressed air supply Leaks in handpiece cable or cable not properly connected
Check the cable and tube connections and replace them, if
necessary
No power output Handpiece defective Replace the handpiece
Accessories Art. no.:
V-ACTOR HF
®
handpiece set 19365
25 mm vibration transmitter 28740
40 mm vibration transmitter 28741
10 mm spherical vibration transmitter without vibration transmitter screw cap 29742
V-ACTOR handpiece
V-ACTOR operating frequency 1 – 50 HZ
Energy selection in steps from 1 – 5 bar
Ambient temperature during operation 10 °C – 30 °C
Ambient temperature during storage and transport 0 °C – 60 °C
Ambient air pressure during operation 800 – 1060 HPA
Ambient air pressure during storage and transport 500 – 1060 HPA
Air humidity during operation 5 – 55%, non-condensing
Air humidity during storage and transport 5 – 95%, non-condensing
Weight incl. cable, filled approx. 400 G
Protection against ingress of water IPX0