Challenge CMT-130, Service Manual

Page: 193 / 226

FEB 2017
CMT 130 Book Trimmer 6-21 6. General Procedures/Information
the fingered gate. A spring-loaded book
stop keeps the books upright.
6. The fingered gate returns to the up position
and the pusher retracts to its starting posi-
tion.
7. Books accumulate on the delivery bed until
the spring-loaded book stop reaches a sen-
sor at the end of the delivery bed indicating
that the Vertical Stacker is full. When the
Vertical Stacker is full, no more books are
delivered from the trimmer until the sensor is
cleared of books.
Option 2: Exit Conveyor
1. As the book exits the trimmer, the Exit Con-
veyor runs. The length of time that the Exit
Conveyor runs for each book is determined
by a time delay relay, which is adjustable by
the potentiometer found on the front face of
the conveyor.
2. Book accumulate on the Exit Conveyor until
they reach the sensor at the end of the con-
veyor. When the sensor detects a book, the
conveyor stops and no more books are de-
livered from the trimmer until the sensor is
cleared of books.
Option 3: Exit Chute
1. As the book exits the trimmer, it slides down
the Exit Chute and into a container placed
underneath the end of chute.