CG emotron TSA Series, Instruction Manual

Page: 10 / 204

6 Introduction CG Drives & Automation 01-5980-01r2
1.5 Standards
The softstarters described in this instruction manual comply
with the standards listed in Table 2. For the declarations of
conformity and manufacturer’s certificate, contact your
supplier for more information or visit www.emotron.com or
www.cgglobal.com.
1.5.1 Product standard for EMC
The Emotron TSA softstarter complies with the product
standard EN(IEC) 60947-4-2: 2007. The standard
Emotron TSA softstarters are designed to meet the EMC
requirements according to:
Category C1 - Emotron TSA -frame sizes 1 & 2
Category C2 - Emotron TSA -frame sizes 3 & 4
.
1.6 Dismantling and scrapping
The enclosures of the Emotron TSA softstarters are made
from recyclable material such as aluminium, iron and
plastic. Each softstarter contains a number of components
demanding special treatment. The circuit boards contain
small amounts of tin and lead. Any local or national
regulations in force for the disposal and recycling of these
materials must be complied with.
1.6.1 Disposal of old electrical and
electronic equipment
This symbol on the product or on its
packaging indicates that this product shall be
taken to the applicable collection point for the
recycling of electrical and electronic
equipment. By ensuring this product is
disposed of correctly, you will help prevent potentially
negative consequences for the environment and human
health, which could otherwise be caused by inappropriate
waste handling of this product. The recycling of materials
will help to conserve natural resources. For more detailed
information about recycling this product, please contact the
local distributor of the
product.
Table 2 Standards
Market Standard Description
European
EMC Directive 2004/108/EC
Low Voltage Directive 2006/95/EC
WEEE Directive 2002/96/EC
All
EN 60204-1
Safety of machinery - Electrical equipment of machines
Part 1: General requirements.
EN(IEC)60947-4-2:
2007
Contactors and motor starters
Part 3: EMC requirements and specific test methods.
EMC Directive: Declaration of Conformity and CE marking
EN(IEC)60947-4-2:
2007
Contactors and motor starters
Safety requirements - Electrical, thermal and energy.
Low Voltage Directive: Declaration of Conformity and CE marking
IEC 60721-3-3
Classification of environmental conditions. Air quality chemical vapours, unit in
operation. Chemical gases 3C3, Solid particles 3S1.
DNV-GL DNV-GL Marine standard
North & South
American
UL508C UL Safety standard for Power Conversion Equipment.
UL 840 UL Safety standard for Power Conversion Equipment.
Russian EAC For all sizes