CG emotron TSA Series, Instruction Manual

Page: 137 / 204

CG Drives & Automation, 01-5980-01r2 Functionality 133
Analogue Output Status [726]
This menu indicates the status of the analogue output.
Fig. 79 Analogue output status example
The status of the output is shown in [%], so the example
indicates that AnOut is active and has a 65% output value.
If 4-20 mA output is used for example, the value 20% equals
4 mA.
I/O Board Status B1 - B2 [727] - [728]
This menu indicates the status for the additional I/O on
option boards 1 (B1) and 2 (B2).
Fig. 80 I/O board status example
Analogue comparator status 1 - 4 [72A]
This menu indicates the active analogue comparators (CA1 -
CA4).
Digital comparator status 1 - 4 [72B]
This menu indicates the active digital comparators (CD1 -
CD4).
Logic function status 1 - 4 [72C]
This menu indicates the active logic outputs (L1 - L4).
Timer status 1- 4 [72D]
This menu indicates the active timers (T1Q - T4Q).
SR Flip-flop status 1 - 4 [72E]
This menu indicates the active flip-flops (F1 - F4).
Counter status 1 - 2 [72F]
This menu indicates the active counters (CTR1 - CTR2).
Time to next start [72G]
This menu indicates the time left to the next allowed start if
at least one of the choices under menu [235] Start Limitation
is activated (i.e. number of starts per hour or minimum time
between starts.
Read-only
NOTE: The shown percentage is an absolute value based
on the maximum value of the in- or output, so related to
either to 10 V or 20 mA.
Read-only
Read-only
Read-only
Read-only
726 AnalogueOut
Stp
65%
728 IO StatusB2
Stp
RE 000 DI100
72A CA1-4
Stp 0000
72B CD1-4
Stp 0000
72C Logic 1-4
Stp 0000
Read-only
Read-only
Read-only
Read-only
72D Timer 1-4
Stp 0000
72E FlipFlop1-4
Stp 0000
72F Counter 1-2
Stp 00
72G TtoNxtStart
Stp 0Min