![CG emotron TSA Series Instruction Manual Download Page 91](http://html1.mh-extra.com/html/cg/emotron-tsa-series/emotron-tsa-series_instruction-manual_2585387091.webp)
CG Drives & Automation, 01-5980-01r2
Functionality
87
Modbus RTU [262]
Set up the parameters for Modbus/RTU) communication.
Baudrate [2621]
Set the baud rate for the communication.
Address [2622]
Enter the unit address for the softstarter.
Fieldbus [263]
Set up the parameters for fieldbus communication.
Address [2631]
Enter or view the unit/node address of the softstarter. Read
& Write access for Profibus and DeviceNet. Read-only for
EtherCAT*.
*) EtherCAT is a future option.
Process Data Mode [2632]
Enter the mode of process data (cyclic data). For further
information, see the Fieldbus option manual.
Read/Write [2633]
Select “Read/Write” to control the softstarter over a fieldbus
network. For further information, see the Fieldbus option
manual.
Additional Process Values [2634]
Define the number of additional process values sent in cyclic
messages.
NOTE: This baud rate is valid only for communication via
the RS485 and USB options.
Default:
9600
2400
0
Selected baudrate
4800
1
9600
2
19200
3
38400
4
57600
5
115200
6
NOTE: This address is valid only for communication via
the RS485 and USB options.
Default:
1
Selection:
1–247
262 Modbus RTU
Stp
2621 Baudrate
Stp
9600
2622 Address
Stp
1
263 Fieldbus
Stp
Default:
62
Range:
Profibus 0–126, DeviceNet 0–63
Node address valid for Profibus(RW), DeviceNet (RW) and
EtherCAT* (RO).
Default:
Basic
None
0
Control/status information is not used.
Basic
4
4 byte process data control/status
information is used.
Default:
RW
RW
0
Read & Write
Read
1
Read-only
Valid for process data. Select “Read” (read-only) for logging
process without writing process data. Select “RW” in normal
cases to control inverter.
Default:
0
Range:
0-8
2631 Address
Stp
62
2632 PrData Mode
Stp
Basic
2633 Read/Write
Stp
RW
2634 AddPrValues
Stp
0
Summary of Contents for emotron TSA Series
