7 Sale Modes
72
PLU’s price will be set to 0.00 and you may enter the temporary price that you wish to use. At any point,
you may press the OVERRIDE key to revert to the PLU’s pre-programmed price.
Whenever you are using an override price the display will show the override status to the left of the
time/date display.
The Ride message on the upper
right side of the display indicates
that you are using an override
price.
<REG> Ride 12:14:19 PM
Delicious Golden Apple
WEIGHT lb
UNIT $ /lb
TOTAL PRICE $
◀
○
7.2.17
DEPT key
The DEPT key is used to temporarily change the department assignment of the scale. That is, if a scale is
assigned to department 1 then all of the PLUs that you select on that scale will be from department 1;
however, if you want to select a PLU from another department, then you can use the DEPT key.
Press the DEPT key. If you are in REG mode the scale will prompt you for a level 2 password; MGR mode
will not display a password entry screen. If you are in REG mode, enter the password and then press the
PRINT key. The Change Department screen will appear.
The New Department entry field will
default to have the same number
as the Old Department field. The
Old Department field indicates the
scale’s assigned department; the
New Department field allows you
enter the temporary department
you wish to change to. Press the
PRINT key after you select the
temporary department.
The display will return to the sales mode screen. The time/date field will show
◀
DEPT#: 2 where the
asterisks indicate that you are in a temporary department assignment state. You can press the DEPT
key to cancel the temporary department assignment or proceed with a transaction. After a
transaction, the scale will revert to its programmed department assignment.
< CHANGE DEPARTMENT >
Old Department: 1
Bakery Department
New Department:[ 2]
