6 Programming
43
may fall-off after they print. If the label does not feed out far enough, then the labels may need to be
pulled-on after they print.
Another reason to change this value is when you use labels with pre-printed lines and boxes. In this
case, you may need to change the Feed Adjust so that fields are printed in the right places.
You may also find that changing label stock, type, or formats may require you to fine adjust the Feed
Adjust setting. However, you will find that when you use the same label stock, you will get very similar
results. Make sure to always use CAS Certified media. Using poor quality media whether it be thermal
paper or labels, may damage your LP-2’s thermal print head and void the warrantee. Consult you CAS
Authorized dealers about where you can purchase the media you require. Also, they can help you with
custom labels and customs formats.
Remember that you can press SAVE or ENTER at any time in order to save the current screen contents
and return to the previous menu. The ESC key exits and returns to the previous menu.
6.2.8
Origin
Once at the SET: Settings menu screen, press the 8 key. The Origin selection and input screen will
appear as follows:
Enter the number of origin. You can select origin number from 256 to 400. (the origin number from 1 to
255 is reserved.)
And input Origin. Maximum characters are 25.
Remember that you can press SAVE or ENTER at any time in order to save the current screen contents
and return to the previous menu. The ESC key exits and returns to the previous menu.
NUMERIC
< SET : ORIGIN >
Origin No.:[ 256]
Text : [ ]
6.3
PLU Programming
When the screen is at the Main Menu Press 4, enter a level 2 or higher password when prompted, and
then the screen will read:
< PLU: PLU DATA >
1.Change PLU Prices
5.Discount/FSP
2.Create PLUs
6.PLU Management
3.Renumber PLUs
7.Edit Nutrifacts
4.Edit PLUs
8.PLU Speed Keys
