Carver 33 SUPER SPORT, Owner'S Manual

Page: 63 / 164

3327 12/04
AC E
LECTRICAL
S
YSTEM
S
ECTION
3
If the voltmeter continues to read zero voltage, either have a qualified
technician service your generator or contact the marina’s management to
identify and correct a shore power problem. If the problem appears to be
with your boat’s AC electrical system, have the system inspected by a
qualified electrician.
3.3.2.2 Shore #1 and #2 Polarity Indicators
These indicators show the polarity of the shore power voltage for the
Line 1 and Line 2 circuits, respectively.
If reverse polarity occurs, immediately switch the respective AC Main
circuit breaker group(s) “OFF.”
If the polarity is correct, the Safe indicator illuminates. If the polarity is
incorrect, the Reverse indicator illuminates. Refer to 3.2.1 Shore Power
for information on correcting reverse polarity.
3.3.2.3 Shore #1 and #2 Ammeters
These ammeters indicate the amount of current that is being drawn by
the Line 1 and Line 2 circuits, respectively.
When the Main circuit breaker is “ON,” all other breakers on the AC
Control Center are “OFF,” and the voltmeter is reading between 100 and
130 volts in a 120-volt system (210 and 230 volts in a 220-volt system), the
ammeter should read zero amps.
As you switch the circuit breakers on the AC Control Center “ON” and
turn on their associated equipment or turn on equipment plugged into
AC C
ONTROL
C
ENTER
Layout-interior