Carver 33 SUPER SPORT, Owner'S Manual

Page: 48 / 164

DC E
LECTRICAL
S
YSTEM
3327 12/04
S
ECTION
2
2.2.2.16 Fuel Transfer Pump
This breaker controls the flow of electricity to the fuel transfer pump
switch at the helm. This pump is present only if your boat has optional
diesel engines. To supply power to the pump switch, switch this breaker
“ON.” When you are finished using the pump, switch this breaker “OFF.”
Refer to 5.1.2.1 Fuel Transfer Pump for information on using the fuel
transfer pump.
2.2.2.17 Trim Tabs
This breaker controls the flow of electricity to the trim tab controls at
the helm. Trim tabs are used to improve the running angle of your boat
while underway. Switch this breaker “ON” to activate the trim tab con-
trols. Refer to 6.5.3 Trim Tabs for more information on using the trim
tabs.
2.2.2.18 Bridge Accessory
This breaker controls the flow of electricity to any aftermarket accesso-
ries installed at the bridge helm. Switch this breaker “ON” to activate
these accessories. Refer to the accessories’ manuals for information on
operating the accessories.
2.2.2.19 Salon Accessory
This breaker controls the flow of electricity to any aftermarket accesso-
ries installed at the optional lower helm. Switch this breaker “ON” to
activate these accessories. Refer to the accessories’ manuals for informa-
tion on operating the accessories.
2.2.2.20 Horn
This breaker controls the flow of electricity to the horn switch at the
helm. To supply power to the switch, switch this breaker “ON.”
2.2.2.21 Wipers
This breaker controls the flow of electricity to the windshield wiper
switch at the optional lower helm. To supply power to the switch, switch
this breaker “ON.”
2.2.2.22 Refrigerator
This breaker controls the flow of electricity to the dual-voltage refrigera-
tor in the galley. The refrigerator operates on either AC power or DC
power. To supply DC power to the refrigerator, switch this breaker
“ON.”