Carver 33 SUPER SPORT, Owner'S Manual

Page: 140 / 164

W
INTERIZATION AND
S
TORAGE
3327 12/04
S
ECTION
8
8.3.7 Sanitation System
Before performing this procedure on the sanitation system, your boat
should be pulled from the water. Refer to the OEM information for more
information on winterizing the sanitation system.
Refer to 4.5 Sanitation System for a description of your boat’s sanita-
tion system.
There are two types of sanitation systems: the standard system and the
overboard discharge system.
8.3.7.1 Standard Sanitation System
1. Empty the waste tank as described in 4.5.2 Emptying the Waste
Tank. Remove as much of the fresh water used in flushing the tank
as possible.
2. If the toilet uses seawater to flush, follow steps a - d below; other-
wise, proceed to step 3.
a. Close the seacock that supplies seawater to the toilet.
b. Disconnect the toilet seawater hose from the seacock.
c. Flush the toilet until all water is drained from the seawater hose.
d. Reconnect the seawater hose to the seacock. Leave the seacock
closed.
You must use a nontoxic, non-alcohol, RV-type (pink) antifreeze in your
boat’s sanitation system. Using the wrong type of antifreeze can damage
the sanitation system. The repair of such damage is not included under
the terms of the Carver Limited Warranty.
3. Flush 4 gallons of nontoxic recreational vehicle antifreeze through
the toilet and allow it to remain in the waste tank while the boat is
in storage.
4. When you remove your boat from storage and prepare to use it again:
a. Pour 5 gallons of fresh water through the toilet.
b. Empty the waste tank as described in 4.5.2 Emptying the Waste
Tank.
Open Closed