62-11389
3
−
32
3.20.2 Remote Control Panel
1 Control panel power on LED
2 System ON/OFF key
3 Reset Button
4 Manual defrost key
5 Control panel lock LED
6 HEAT mode LED
7 COOL mode LED
8 Set point display
9 Up and down arrow keys
10Temperature display
1
2
4
5
9
6
7
10
8
WAITING FOR COMMUNICATION WITH MICROPROCESSOR
UNIT WAS TURNED OFF VIA REMOTE CONTROL
UNIT IN DEFROST MODE
TEMPERATURE SENSOR MALFUNCTION
TEMP.
DISPLAY
SET POINT
DISPLAY
NOTE:
1. TEMPERATURE DISPLAY (
5
C OR
5
F) IS DEPENDENT ON MICROPROCESSOR CONFIGURATION
2. ENGINE LIGHT WILL NOT ILLUMINATE IN THIS APPLICATION.
P1
DISPLAYED WHEN SETTING PRE-SET SETPOINTS
3
The unit may be fitted with an optional remote control
panel. The panel displays compartment set point,
compartment temperature and operating modes (heat,
cool or defrost). The set point may be set and the unit
may be started and stopped using the remote panel.
This compact panels can be mounted to suit the
individual operator’s preferences - in the cab, on the
front bulkhead, or in the compartment (including in the
wall itself).
The remote control panel can be used to :
Turn the unit on or off:
Check compartment temperature
Check and change set point
Initiate manual defrost
Check mode of operation
