Carrier VECTOR 6500, Operation & Service Manual

Page: 296 / 330

9 − 8
62-11389
9.5 Speed Control System Diagnostics
Table 9 − 1 ENSCU LED Fault Chart
Fault LED flash code Diagnostic tree
1 Engine Over Speed: more than 2,530 RPM One Long–One Short Figure 9 − 1
2 No signal from ENSSN for 2 seconds after RPM
is greater than 1,000 RPM for 10 seconds, OR
for 5 seconds while engine cranking (no voltage
at ENSCU pin 18).
Two Long–One Short Figure 9 − 2
3 Fuel/speed actuator (FSA) wiring disconnected
or open circuit. Coil Resistance Spec: 2.8 ohm
+/- 10%.
Two Long–Three Short Figure 9 − 3
4 ENSCU supply voltage is greater than 26V. Two Long–Seven Short Figure 9 − 4