![background image](http://html1.mh-extra.com/html/carrier/truvu-uc561/truvu-uc561_installation-and-startup-manual_2562515050.webp)
To set up the controller through the Service port
TruVu™ UC561
CARRIER CORPORATION ©2021
Installation and Start-up Guide
All rights reserved
46
To discover devices on a network
1
To address a network of devices, you must first select one i-
Vu® XT or TruVu™ controller and set the
IP
Address
,
Subnet Mask
, and
Default Gateway
on the
Ports
tab.
NOTE
This controller is referred to as the connected controller.
2
On the
Local Network
tab, at the top of the page, verify that the connected controller's
Mode
,
IP Address
,
Subnet Mask
, and
Default Gateway
are accurate.
3
Use the following settings to define the devices that you want to discover in the
Local Devices
table.
Local Devices
Only Unconfigured
When checked, only discovers devices that do not have an IP address and are
linked to the connected controller's network.
When unchecked, discovers both configured and unconfigured devices.
Clear All
Erases all information in the table.
Export
Creates .csv file of the data in the table, limited to 256 devices.
4
Click
Discover
to populate the table with your i-
Vu® XT or TruVu™ devices that are on a single network
communicating with the connected i-
Vu® XT or TruVu™ controlle
r.
Summary of Contents for TruVu UC561
Page 70: ......
Page 71: ...Carrier 2021 Catalog No 11 808 853 01 12 2 2021...