![background image](http://html1.mh-extra.com/html/carrier/truvu-uc561/truvu-uc561_installation-and-startup-manual_2562515014.webp)
Addressing the TV-UC561 through the Service port
TruVu™ UC561
CARRIER CORPORATION ©2021
Installation and Start-up Guide
All rights reserved
10
To connect the TV-UC561 to the computer using a USB cable
.
1
Connect a USB Type-A Male to Male USB cable from a computer to the controller's USB Service Port, as
shown below.
2
A new Ethernet connection will appear on your computer.
3
If your computer uses a static IP address, use the following settings for the new connection:
○
Address: 169.254.1.x, where x is 2 to 7
○
Subnet Mask: 255.255.255.248
○
Default Gateway: 169.254.1.1
If it uses a DHCP address, leave the address as it is.
4
Open a web browser on the computer
5
Navigate to http://local.access or http://169.254.1.1 to see the controller setup pages.
See
To set up the controller through the Service Port
(page 43) for detailed information.
Summary of Contents for TruVu UC561
Page 70: ......
Page 71: ...Carrier 2021 Catalog No 11 808 853 01 12 2 2021...