![background image](http://html1.mh-extra.com/html/carrier/truvu-uc561/truvu-uc561_installation-and-startup-manual_2562515045.webp)
Adjusting the TV-UC561 driver properties
TruVu™ UC561
CARRIER CORPORATION ©2021
Installation and Start-up Guide
All rights reserved
41
Communication Status
Diagnostic Reporting
is not applicable to the TV-UC561.
Protocol Status
shows the status of the protocols currently running on the TV-UC561.
Standalone Controller Detection
You can use the fields on this page with a binary input in your control program to detect when the controller does
not receive a write request from the selected network within the specified amount of time. The input remains OFF
as long as write requests are received, but switches to ON if the controller does not receive a request within the
specified time. The binary input must have the Expander number and Input number set to
99
and the I/O Type set
to
Special
.
Flow Calibration Archive
NOTE
This driver property only applies to controllers with built-in airflow sensors.
The
Flow Calibration Archive
page shows measured flow and sensor readings that were entered in the i-Vu® Test
and Balance tool or through the stand-alone Test & Balance Utility.
Summary of Contents for TruVu UC561
Page 70: ......
Page 71: ...Carrier 2021 Catalog No 11 808 853 01 12 2 2021...