Adjusting the TV-UC561 driver properties
TruVu™ UC561
CARRIER CORPORATION ©2021
Installation and Start-up Guide
All rights reserved
36
BACnet Controller Properties
The
BACnet Controller Properties
page provides the TV-UC561's Ethernet MAC address plus the items described
in the table below:
IP Configuration
Allow setup of IP addressing
through an external tool
When this field is enabled, you can set up IP addressing through a tool. IP
addressing is typically set up through the Service port.
Enable IP configuration
changeover
Only for custom static IP addressing
—
Select this field to remotely change the
controller's
IP Address
,
Subnet Mask
, and
Default Gateway Address
.
Type the new addresses and the
UDP Port
that your server is using to
communicate to all controllers.
In the
Changeover timeout
field, enter:
•
A specific length of time for the controller to attempt to communicate with the
Next Default Gateway Address
. The controller will use the
Next
setting as
soon as the controller can communicate with the
Next Default Gateway
Address
, or when the timeout occurs, whichever comes first.
•
0:00
to have the controller use the
Next
settings as soon as the controller
can communicate with the
Next Default Gateway Address
.
See "To remotely change a controller's IP address" in i-Vu® Help for more
information on using this feature.
BACnet Firewall
If this IP controller is accessible from the Internet, you can increase security by enabling its BACnet firewall. When
enabled, this feature prevents the controller from responding to BACnet messages from unidentified sources and
allows communication only with IP addresses that you define. These can be all private IP addresses and/or a list
of IP addresses. Follow the instructions in the i-Vu® interface to set up the BACnet firewall.
Summary of Contents for TruVu UC561
Page 70: ......
Page 71: ...Carrier 2021 Catalog No 11 808 853 01 12 2 2021...
