Carl Valentin Compa II 103/8 T, Quick Reference Manual

Page: 107 / 214

Compa II
English 107
Print Settings
Keys: ,
Speed Indication of print speed in mm/s.
Value range: 50 mm/s
… 200 mm/s (see the technical data).
Contrast Indication of value to set the print intensity when using different materials, print speeds or
printing contents.
Value range: 10 %
… 200 %.
Key:
Transfer ribbon control Examination if the transfer ribbon roll is to end or if the ribbon was torn at the unwinding roll.
Off: The ribbon control is deselected, i.e. the printer continues without an error message.
On, weak sensibility: The current print order is interrupted and an error message appears at
the printer display. The printer reacts at approx. 1/3 more slowly to the end of the transfer ribbon
(default).
On, strong sensibility: The current print order is interrupted and an error message appears at
the printer display. The printer reacts immediately to the end of the transfer ribbon.
Key:
Y displacement Indication of initial point displacement in mm.
Value range:
−30.0 … +90.0.
Key:
X displacement Displacement of the complete print transverse to the paper direction.
Value range:
−90.0 … +90.0.
Key:
Tear off Indication of value to which the last label of a print order is moved forward and is moved back to
the beginning of label at a new print start.
Value range: 0
… 70.0 mm
Standard: 13 mm.
Label Layout
Keys: , ,
Label length Indication of label length in mm.
Minimum height: 5 mm (dispenser mode: 25 mm).
Gap length Indication of distance between two labels in mm.
Minimum value: 1 mm.
Key:
Column printing Indication of width of one label as well as how many labels are placed side by side.
Key:
Measure label
Press key to start measuring.
Key:
Label type
Generally adhesive labels are set. Press key to select continuous labels.
Key:
Material selection Selection of the used label and transfer ribbon material.
Key:
Photocell Selection of the used photocell.
The selection of one of the following photocell types is possible: transmission photocell normal
and inverse, reflexion photocell normal and inverse, ultrasonic photocell (option).
Scan position (AP) Entry of percental label length by that the label end is searched.