Carestream Quantum Odyssey HF QG-32, Operator'S Manual, Page: 94 / 102

Chapter 5 User Maintenance
Revision Q HF Series X-ray Generators - Operator’s Manual
5-12
Quantum Medical Imaging, LLC
next to the Wall2 FS: field until the desired film/screen combination
name appears. The selected film/screen combination is now the film/
screen combination used when "WALL2" (AUX) image receptor is selected
for exposures using AEC and APR AEC mode exposures.
5. Auxiliary FS setting (enabled only generators equipped with "Universal"
type AEC [i.e., AEC Board A11 AY40-027S is installed]): Press the key
next to the
Auxiliary FS: field until the desired film/screen combination
name appears. The selected film/screen combination is now the film/
screen combination used when "AUX" image receptor is selected for
exposures using AEC and APR AEC mode exposures.
Language Setting
The Service Settings Menu, shown below, displays the current language set-
ting. The default language setting is English. To change the language setting,
proceed as follows:
Figu re 5-8. Choo sing L anguage and Date Form at Setting s
Press the key next to the Language field to scroll through available lan-
guages (English, French, Spanish, German, Italian, etc.) until desired lan-
guage is displayed.
AEC Backup Setting
The AEC Backup Setting screen, shown below, displays the current AEC
backup mAs setting. Note that this is the system-wide backup mAs setting,
and as such, will be effective on all AEC exposures. The procedure-specific
back up time is set using the APR Edit function (refer to APR Edit chapter in
the Operator Manual for instructions on setting individual procedure backup
mAs). Note: The lower of the two backup settings will take precedence when
set to unequal values.
PRESS
THIS KEY
TO SELECT
LANGUAGE