Carestream Quantum Odyssey HF QG-32, Operator'S Manual, Page: 65 / 102

Chapter 3 Operation
HF Series X-ray Generators - Operator’s Manual Revision Q
Quantum Medical Imaging, LLC
3-27
Plus 15V ERROR Missing or incorrect +15 VDC
supply voltage. Call Technical Service/Support.
Plus 24V ERROR Missing or incorrect +24 VDC
supply voltage. Call Technical Service/Support.
Plus 5V ERROR Missing or incorrect +5 VDC
supply voltage. Call Technical Service/Support.
Prep WDT ERROR Exposure sequence disabled
due to loss of communication
with PREP watchdog timer. Call Technical Service/Support.
Receptor Not
Ready ERROR The signal on the Receptor
Ready terminal of the Digital
Interface Board A9 (AY40-
034T) is not ready within 500
ms from the time PREP was ini-
tiated. Call Technical Service/Support.
Rotor Current ERROR Tube rotor is not getting cor-
rect current to start.
Call Technical Service/Support.
Rotor Overrun ERROR Tube has been rotating for
longer than 30 continuous sec-
onds. Call Technical Service/Support.
Rotor Temp WARNING Tube rotor is too hot. Allow tube to cool for thirty minutes
and then re-take exposure.
Table
Bucky ERROR The table bucky has been
selected but did not return the
ready signal to start exposure.
(This may take up to five sec-
onds after exposure is
requested.) Verify that "TABLE" receptor was not
selected at OCP with system not
having table receptor.
Tube
Limits WARNING Backup time was reached
based on current AEC tech-
nique factors exceeding tube
exposure limits. Reduce technique factor(s). Re-take
exposure.
Table 3-3. Fault Messages
MESSAGE/
INDICATION
MESSAGE
TYPE
DESCRIPTION REQUIRED ACTION