Carestream Quantum Odyssey HF QG-32, Operator'S Manual, Page: 80 / 102

Chapter 4 APR Editor
Revision Q HF Series X-ray Generators - Operator’s Manual
4-14
Quantum Medical Imaging, LLC
k. When all exposure factors for Procedure Step 1 are correct,
press the PATIENT SIZE up key (see Figure 4-10, item b) to
advance to the next procedure step (i.e., "Procedure Step
2").
l. Modify exposure factors as required for this thickness set
point and continue until all ten procedure steps have been
configured.
m. Using the PATIENT SIZE up/down keys (see Figure 4-10,
item b), select the procedure step as the "default" setting
that will appear when the operator initially accesses this pro-
cedure using APR mode. When the desired procedure step is
selected, press the
Set Start Step key (see Figure 4-10,
item j) to set this step as the default. Note that the Set
Start Step field should now match the Procedure Step
number as a confirmation the setting was made.
n. Press the Previous, Save key (see Figure 4-10, item k) to
save the modifications and return to the APR View Edit
Screen (see Figure 4-9) or press the
Previous, No Save key
to ignore the changes and return to the APR View Edit
screen.
1.Access the APR View Edit screen (see Figure 4-9) as described in
the "Editing a View Name" procedure.
2.Press the key adjacent to the Procedure Value 2 field. The APR
Procedure Value 2 screen is displayed:
Figure 4-8. APR Procedure Value 2 Screen
a. The setting in the MAS/SEC field (see Figure 4-9, item a)
determines the unit of measure of the exposure duration in
terms of either time (SEC) or mA-seconds (mAs). Pressing
the key next to this field toggles between these two settings.
a
b
c
d