Carestream Quantum Odyssey HF QG-32, Operator'S Manual, Page: 27 / 102

Chapter 2 General Infor mation
HF Series X-ray Generators - Operator’s Manual Revision Q
Quantum Medical Imaging, LLC
2-7
Refer to Table 2-3 for performance specifications of three-phase HF Series X-ray Generators.
* Time measured at 75% of the peak kVp waveform; For exposure times from 1.0 mS
to 49 mS, time accuracy is 2% + 1 mS; for exposure times from 50 mS to 100 mS,
time accuracy is 1% + 1 mS
NOTE: AEC TECHNIQUES SHOULD HAVE EXPOSURE TIMES EXCEEDING 8 MS.
**
mAs is tube dependent; the generator may not reach maximum mAs
due to tube type. In AEC mode, the mAs is limited to 600.
***
High-Speed Starter Duty Cycle: are not to exceed two activations within any
one minute period
Table 2-3. HF Series Three-Phase Generator Perform ance Specificati ons
Model
QG-32-2,
QG-32-3
Model
QG-40-2,
QG-40-3
Model
QG-50,
QG-50-2
Model
QG-65
Model l
QG-80
Cat. No.
QG-3200-2,
QG-3200-3
Cat. No.
QG-4000-2,
QG-4000-3
Cat. No.
QG-5000
Cat. No.
QG-6500
Cat. No.
QG-8000
Maximum kW 32 40 50 65 80
mA Stations;
Small Focus (S)
Large Focus (L)
25S, 75S, 150S
100L, 200L,
250L, 320L,
400L, 500L
25S, 75S, 150S
100L, 200L,
250L, 320L,
400L, 500L
25S, 75S, 150S
100L, 200L,
320L, 400L,
500L, 650L
25S, 75S, 150S
100L, 200L,
320L, 400L,
500L, 650L, 800
25S, 75S, 150S
100L, 200L,
320L, 400L,
500L, 650L,
800
mA Accuracy 5% +1mA 5% +1mA 5% +1mA 5% +1mA 5% +1mA
kVp Range
(kVp)
40-125
40-125
(40-150 with
QG-150 option)
40-125
(40-150 with
QG-150 option)
40-150 40-150
kVp increments
(kVp/step)
1.0 1.0 1.0 1.0 1.0
kV Accuracy 4% 4% 4% 4% 4%
150 kVp
optional?
Yes Yes Yes Standard Standard
Time Range
(sec.)
0.001 - 6.3 0.001 - 6.3 0.001 - 6.3 0.001 - 6.3 0.001 - 6.3
Time Accuracy
*
1 mS +0.5%* 1 mS +0.5%* 1 mS +0.5%* 1 mS +0.5%* 1 mS +0.5%*
Minimum Expo-
sure Time (sec.)
0.001 0.001 0.001 0.001 0.001
mAs Range
**
0.025-600 0.025-600 0.025-800 0.025-800 0.025-800
High-Speed
Starter
***
No Option Option Yes Yes
Ripple Voltage
(output)
5% 5% 5% 5% 5%