Carestream Quantum Odyssey HF QG-32, Operator'S Manual, Page: 64 / 102

Chapter 3 Operation
Revision Q HF Series X-ray Generators - Operator’s Manual
3-26
Quantum Medical Imaging, LLC
Lost Expose WARNING Exposure terminated prema-
turely because EXPOSE key
was released before exposure
was completed. Press any key on Operator Control
Panel to clear warning message.
Re-take exposure.
MA Current ERROR Indicates the exposure mA cur-
rent is out of range. Call Technical Service/Support.
Minus 15V ERROR Missing or incorrect -15 VDC
supply voltage.
Call Technical Service/Support.
Model Limits ERROR PREP was pressed while a
combination of the selected
parameters is outside of the
limits of the generator model
or tube type. Call Technical Service/Support.
No HSS
Connected ERROR No High Speed Starter
detected when selected. Call Technical Service/Support.
No HV ERROR High-Voltage transformer or
Power Module not functioning
properly.
Call Technical Service/Support.
Not Rotating ERROR Tube rotor or generator rotor
drive/high-speed starter (HSS)
unit not functioning properly. Call Technical Service/Support.
NVRam ERROR Non-volatile random access
memory (NVRAM) returned
incorrect checksum. Call Technical Service/Support.
OCP Micro ERROR Operator Control Panel micro-
processor (A16U3) returned
incorrect checksum. Call Technical Service/Support.
Phase Missing ERROR Hardware has detected that at
least one phase of a three-
phase generator is not present. Call Technical Service/Support.
Please Wait WARNING Operator attempted to take
exposure but system not yet
ready Allow more time for system to reach
its ready state before taking next
exposure.
Note: The system will not
allow more than two high-speed
tube starts within a one minute time
period.
Table 3-3. Fault Messages
MESSAGE/
INDICATION
MESSAGE
TYPE
DESCRIPTION REQUIRED ACTION