Carestream Quantum Odyssey HF QG-32, Operator'S Manual, Page: 56 / 102

Chapter 3 Operation
Revision Q HF Series X-ray Generators - Operator’s Manual
3-18
Quantum Medical Imaging, LLC
If the generator is in APR mode and tomo mode is activated, the APR
Tomo Screen will appear, as shown below:
Figure 3-8. APR Tomo Mod e Screen
The tomo sweep time appears in the APR Tomo Mode screen, depending
upon whether "TIME" or "MAS" display mode is selected. If the sweep
time is changed by selecting a different angle/time key on the tomogra-
phy system control panel and the generator is in tomography mode, the
exposure time updates instantly and the generator is properly set up for
the changed selection, but the angle and time displayed in the "circle" will
not automatically update and remains with the original sweep time selec-
tion. This indication can be updated by a) exiting out and then back in to
tomo mode or b) selecting a different receptor (or NONE), then re-select-
ing the correct tomo receptor.
NOTE: If a change in the time setting is made on
the generator OCP after the tomography system
sets the time, the sweep time will not match what
the tomography system expects and, therefore,
the exposure will not be correct.
NOTE: On Pausch tomography systems, press
PREP key on the operator control panel to reset
the tomo back to its initial position.
Returning to Radiographic Mode
The OCP display will automatically switch from tomography mode to radi-
ography mode when:
• the "radiographic mode select" button on the tomography system’s
control panel is pressed
EXPOSURE
TIME
SETTING
TOMO
ANGLE/
TIME
SETTING
(FROM
TOMO
SYSTEM)
TIME/
MAS
SELECT
KEY