147
Menu Description
Men
u
Gu
ide
Men
u
De
scr
iption
High altitude
Switch the fan mode to suit installation at low or high altitudes (above 2,300 m [7,545.8']).
Option
Function
Off
Setting for altitudes lower than 2,300 m (7,545.8').
On
Setting for altitudes of 2,300 m (7,545.8') or higher.
Lens shift mode
Switch the available lens shift range as needed.
Option
Function
Normal
Provides a normal lens shift range.
Expanded
Provides an expanded lens shift range.
Marginal focus
In dome projection, image focus can be adjusted on the edges of the screen, and the
remote control can be used to activate and deactivate this focus adjustment. For detailed
instructions, refer to “Adjusting Peripheral Focus” (
Option
Function
Off
Disable remote focusing of image edges.
On
Enable remote focusing of image edges. To access the adjustment
window, press the
LENS
button on the projector twice or press the
FOCUS
button on the remote twice.
Reset
Restore edge focusing to the standard position.
• When [High altitude] is switched, [Lamp mode] of the [Image adjustment] menu
automatically changes as follows.
• The changed [Lamp mode] can be changed manually in the menu.
• Changing [Lamp mode] manually may shorten the useful life of the lamp.
High altitude
Lamp mode
[Off] > [On]
[Full power], [Power saver 1], [Power saver 2] >
[Power saver 1]
[On] > [Off]
[Full power], [Power saver 1], [Power saver 2] >
[Full power]
• Selecting [Expanded] may lower image quality and keystone correction precision,
depending on the extent of lens shift.
• Selecting [Normal] when the lens is in the expanded range (outside the normal
position) will execute lens shift reset (
).
• The marginal focus feature is not available depending on the type of lens installed.
• Setting this function to [Off] only prevents display of the adjustment window.
Adjustment values are still retained. Use this setting to prevent remote focusing of
image edges.
