210
Maintenance
Replacing the Lamp
When the usage time of the lamp exceeds a certain amount of time, the following
message (two types) is displayed for 10 seconds every time the projector is turned
on.
When the time for lamp replacement is near
Prepare a new lamp when this screen is displayed.
•
Only the [ ], [ ],
OK
,
POWER
,
FOCUS
,
ZOOM
and
LENS SHIFT
buttons are
available while this screen is displayed.
•
When you press the
POWER
button, “Push POWER button again to turn off
power.” message appears.
•
After this screen has been displayed for 10 seconds and disappeared, all buttons
become operable.
•
This message will not be displayed again if you select [No] in response to the
message “Do you want to display this message again?”.
When the time for lamp replacement has passed
If a lamp replacement message is displayed, see “Lamp Replacement Procedure”
(
•
Only the
POWER
,
OK
,
FOCUS
,
ZOOM
and
LENS SHIFT
buttons are available
while this screen is displayed.
•
When you press the
POWER
button, the “Push POWER button again to turn off
power.” message appears.
•
When this screen has disappeared after being displayed for 10 seconds, all
buttons become operable.
•
You can check the usage time of the lamp in [Lamp counter] in the [System
settings] menu (
•
This screen is not displayed when [Lamp warning display] is set to [Off] (
Guidelines on lamp replacement timing
WUX7500
Approx. 3000 hours
WUX6700
Approx. 3000 hours
WUX5800
Approx. 3500 hours
