159
Menu Description
Men
u
Gu
ide
Men
u
De
scr
iption
IR receiver settings
Select the infrared receiver of the projector.
Option
Function
All
Use both the front and the rear receivers on the projector.
Front
Use the front receiver on the projector.
Rear
Use the rear receiver on the projector.
Remote control channel
Separate channels can be assigned to up to four projectors so that a single remote control
can be used with each projector.
Selecting the Projector Channel
If a wired remote control is used, there is no need to set the remote control channel.
Option
Function
Ch1
Select the remote control channel to use with this projector.
Ch2
Ch3
Ch4
Independent
Can be controlled from a remote control set to any channel.
Selecting a Channel on the Remote Control
After changing the projector channel from the menu, always change the remote control
channel accordingly.
Ch1
Hold down both the
Ch
button and [1] button for 3 seconds.
Ch2
Hold down both the
Ch
button and [2] button for 3 seconds.
Ch3
Hold down both the
Ch
button and [3] button for 3 seconds.
Ch4
Hold down both the
Ch
button and [4] button for 3 seconds.
Independent
Hold down both the
Ch
button and [0] button for 3 seconds.
To Unlock Key Lock Function
Turn off the projector and unplug the power plug. Hold down the
OK
button on the projector
and plug in the power cord, as you continue to hold down the
OK
button. In a moment, a
beep will sound, and the controls will be unlocked.
When you access this setting from the projector’s side controls, [Main unit] is not
available. Similarly, when you access the setting from the remote control, [Remote
(wireless)] is not available.
