Troubleshooting
158
Memory Card and Accessories
Cannot insert the memory card.
- The memory card was not facing the correct direction. Turn the memory card over and insert it.
Cannot record on the memory card.
- The memory card is full. Delete some recordings (
A
92, 123) to free some space or replace
the memory card.
- Initialize the memory card (
A
36) when you use it with the camcorder for the first time.
- The LOCK switch on the memory card is set to prevent accidental erasure. Change the position
of the LOCK switch.
- A compatible memory card must be used to be able to record movies on a memory card
(
A
33).
- The folder and file numbers have reached their maximum value. Set
r
>
[File Numbering]
to [Reset] and insert a new memory card.
The wireless controller will not work.
- Set
q
>
[Wireless Remote Control] to [On].
- Replace the battery of the wireless controller.
Cannot upload files wirelessly using an Eye-Fi card.
- You may have inserted the Eye-Fi card into memory card slot
2
. Insert it into memory card slot
3
.
-
q
>
[Eye-Fi Communication] is set to [Off] (
…
appears onscreen). Set it to [Automatic].
- Wireless communication is not available in recording mode or while the optional WM-V1
Wireless Microphone is attached to the camcorder. Set the camcorder to playback mode or
remove the WM-V1.
- Opening the LCD panel may help when the wireless connection is not strong enough.
- During wireless transfer, wireless communication may stop when the wireless signal conditions
worsen (
‰
appears onscreen). Perform wireless transfer in a place with good signal
conditions.
- Contact the card manufacturer’s customer care.
The wireless communication status icon does not appear
- You may have inserted the Eye-Fi card into memory card slot
2
. Insert it into memory card slot
3
.
Connections with External Devices
Video noise appears on the TV screen.
- When using the camcorder in a room where a TV is located, keep a distance between the
compact power adapter and the power or antenna cables of the TV.
Playback looks fine on the camcorder but there is no image on the TV screen.
- The video input on the TV is not set to the video terminal to which you connected the
camcorder. Select the correct video input.
- There will be no video output from the AV OUT terminal while an optional CTC-100 Component
Cable is connected to the camcorder’s COMPONENT OUT terminal. Disconnect the CTC-100
Component Cable in advance to use the AV OUT terminal.
There is no sound from the TV.
- When connecting the camcorder to an HDTV using an optional CTC-100 Component Cable,
make sure to connect also the audio connections using the white and red plugs of the
STV-250N Stereo Video Cable.
COP
Y
