Copying Recordings to a Memory Card
126
Copying Photos from the Index Screen
1 Open the [Photos] index screen (
A
91).
• Check that you have selected the
&
tab (built-in memory) or
6
tab (memory card
2
).
2 Open the screen to copy photos.
[Edit]
>
[Copy (
&'7
)] or [Copy (
6'7
)]
3 Touch the desired option and then touch [Yes].
• When you select [Select], perform the following procedure to select the individual photos you
want to copy before touching [Yes].
• Touch [Stop] to interrupt the operation while it is in progress.
• The selected photos are copied.
4 Touch [OK].
To select individual photos
1 Touch on the individual photos you want to copy.
• A checkmark
!
will appear on the photos you touch. The total number of selected photos will
appear next to the
"
icon.
• Touch a selected photo to remove the checkmark. To remove all checkmarks at once, touch
[Remove All]
>
[Yes].
2 After selecting all the desired photos, touch [OK].
Options
IMPORTANT
• Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so
may result in permanent data loss.
- Do not open the double memory card slot cover.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the camcorder’s operating mode.
• If supported recordings are copied onto an Eye-Fi card in memory card slot
3
, wireless upload will
start automatically if you are within the range of a configured network. Always verify that Eye-Fi
cards have been approved in the country/region of use. See also
Using an Eye-Fi card
(
A
136).
NOTES
• In the following cases, you will not be able to copy recordings to the memory card:
- If the double memory card slot is open.
- If the LOCK switch on memory card
3
is set to prevent writing.
- If there is no memory card in memory card slot
3
.
• Scenes that were edited using the supplied software
VideoBrowser
and were then transferred
back to the camcorder cannot be copied to the memory card.
• If there is not enough space on memory card
3
, as many photos as possible will be copied before
stopping the operation.
Operating modes:
[Select]
Select individual photos to copy.
[All Photos]
Copy all the photos.
COP
Y
