background image

Adding Decorations

104

To use [Pens and Stamps]

1 Touch  [

Ó

].

• The [Pens and Stamps] screen will appear.

2 Select the desired pen or stamp from [Tools].

• The main decoration screen will appear again.

3 Draw freely on the canvas.

• To select a different pen or stamp: Repeat steps 1 and 2.
• To change color: Touch [

Ó

] and then touch the white or black button under [Colors]. 

Alternatively, touch [

Ó

>

 [

Ö

] and select a color from the color palette.

• To clear your freehand drawings and stamps: Touch [

Ó

>

 [Clear] 

>

 [Yes] 

>

 [

K

].

• To save your freehand drawings and stamps in the built-in memory: Touch [

Ó

>

 [

&

Save] 

>

 

[Yes] 

>

 [

K

].

• To load a previously saved canvas (freehand drawings and stamps only) from the built-in memory: 

Touch [

Ó

>

 [

&

Load] 

>

 [Yes] 

>

 [

K

].

!

Canvas - The area where you will draw and see your decorations in action.

"

Toolbar.

#

[

Ó

 Pens and Stamps] Select the type of pen or stamp and its color. You can also 

save a canvas or load a previously saved canvas.

$

[

×

 Animated Stamps] Select animated stamps to add to your decoration.

%

[

Ø

 Captions] Add the date, date and time, story title or story theme category as a 

caption that will be included in the recording.

&

[

Ü

]* (Image Mix) Choose one of 27 different frames to add onto the canvas. Image 

mix can be used in combination with the pens, stamps and animated stamps. During 
playback, you can add a watermark to the picture using image mix.

'

[

Ý

]* In recording mode: pause the live video. Touch [

Þ

] to restore the live video. 

You can add decorations to the frozen image and even record it.
In playback mode: pause the playback. Touch [

Ð

] to resume playing back the scene.

(

[

ß

] Minimize the toolbar to the top of the screen to view almost all of the canvas. 

Touch [

à

] to restore the toolbar.

* Not available in 

 mode.

COP

Y

Summary of Contents for VIXIA HF G20





































































































































































































Reviews: