MV750i E, MV730i E, MV700i E, MV700 E, MV690 E
DISASSEMBLING
11
1-9 Separation of Recorder Holder
(1) Remove three screws (d
×
3), and detach the Spring, Recorder Holder, Insulation Rubber and Sheet.
<Note on Reassembling>
(1) When using the Insulation Rubber supplied as a service part, apply Hanarl KS-39M (DY9-3053-000) to the entire surface of the
Insulation Rubber.
(2) Position the Sheet as illustrated.
(3) Position the Spring as illustrated.
(4) Attach the UL Tape to the position indicated in the figure.
<Instruction for Supply>
Entire surface of Insulation Rubber : Hanarl KS-39M (DY9-3053-000)
Fig. 8
Note on Reassembling (1)
Note on Reassembling (2)
Note on Reassembling (4)
Note on Reassembling (3)
3.4mm
Metal
M1.4
Stepped Screw
d
Conceal the holes
for screws while
paying attention
not to go beyond
the Recorder Holder.
Hanarl KS-39M
(1) - d
(1) - d
DMC III
Insulation Rubber
Insulation Rubber
Insulation Rubber
Recorder Holder
Insulation Rubber
Spring
Spring
Sheet
Sheet
(1)
Outline reference of flexible
cable:
+
1 mm,
−
0 mm
Be sure to cover the patterned
part.
The outline step-difference part
of the DMC chassis shall be
used as the reference level.
DMC III
UL Tape
(9
×
20)
Guideline for attaching
±
1mm
Instruction for Supply
Summary of Contents for MV750i E
Page 193: ...22 MV750i E MV730i E MV700i E MV700 E MV690 E PARTS LIST Lens Unit Section 1 1 2 3 1 1 1 2 ...
Page 195: ...24 DMC III PARTS LIST 1 10 3 9 5 7 8 6 4 2 3 3 Mechanical Chassis Section 1 ...
Page 197: ...26 DMC III PARTS LIST 1 2 3 4 5 6 7 8 6 1 9 10 13 11 12 Mechanical Chassis Section 2 ...
Page 201: ...30 DMC III PARTS LIST 1 3 4 5 8 9 6 10 7 2 11 Mechanical Chassis Section 4 ...
