MV750i E, MV730i E, MV700i E, MV700 E, MV690 E
SERVICE MODE · ADJUSTMENT
13
Fig. 11
3
1
2
4
5
8
9
6
7
5-1-1 Indication in Service Mode
Shown below are the indications in the service mode.
1.
MODE : Indicates the MODE currently selected. (RD/WR/ST)
2.
Indicates for which block the command is specified. (MA, MD, CA, CD, etc.)
3.
CS : Indicates the Chip Select currently specified. (0~F)
4.
Function : Indicates the Function currently selected. (00~FF)
5.
ADDR : Indicates the ADDRESS currently selected. (0000~FFFF)
6.
DT : Indicate, in hexadecimal representation, the DATA currently being read or set. (00~FF)
7.
Data write status (0 : Read mode, 1 : Ready to write, C : Write execution)
8.
ST : Adjustment status (02: During adjustment, 05: Adjustment OK, 09: Adjustment NG)
9.
ST2 : Adjustment status (for use in AF adjustment)
Summary of Contents for MV750i E
Page 193: ...22 MV750i E MV730i E MV700i E MV700 E MV690 E PARTS LIST Lens Unit Section 1 1 2 3 1 1 1 2 ...
Page 195: ...24 DMC III PARTS LIST 1 10 3 9 5 7 8 6 4 2 3 3 Mechanical Chassis Section 1 ...
Page 197: ...26 DMC III PARTS LIST 1 2 3 4 5 6 7 8 6 1 9 10 13 11 12 Mechanical Chassis Section 2 ...
Page 201: ...30 DMC III PARTS LIST 1 3 4 5 8 9 6 10 7 2 11 Mechanical Chassis Section 4 ...