Chapter 8
MultiPASS Printer Setup and Other Utilities in the Desktop Manager 8-7
MultiP
ASS Printer
Setup and Other
Utilities
❏
❏
❏
❏
❏
Pause Duration
You can set the length of the pause that you may have to insert when
dialling a long distance number.
❏
❏
❏
❏
❏
Error Correction (ECM)
You can select this option to reduce system and line errors when
sending a fax. With this option selected, the system checks each
outgoing fax for lost data. If data has been lost from a portion of a
page, the system transmits that portion again after confirming that all
data within that portion can be transmitted successfully.
❏
❏
❏
❏
❏
Auto Start Send
When you select this option, the unit starts scanning automatically if a
speed dial number is pressed.
❏
❏
❏
❏
❏
Off Hook Alarm
You can select this option to turn on the alarm after the MultiPASS
printer has received or sent a fax if the telephone is off-hook.
❏
❏
❏
❏
❏
Contrast
You can select a setting that determines the level of contrast in the
faxes you send. The Standard setting is usually appropriate for most
documents. However, based on the lightness or darkness of your
original fax document, you may prefer to lighten or darken the
contrast for the fax transmission.
❏
❏
❏
❏
❏
Position
You can select where you want the sent fax heading information (your
fax number, your name, and date and time) to print on the faxes you
send. This information is known as the Transmit Terminal
Identification (TTI).
❏
❏
❏
❏
❏
Mark Faxes With
Select how you would like to identify the fax/phone number in the
header of a fax you send. For example, if you typically use the
designated number for phone calls rather than sending faxes, you can
identify the number as a telephone number. Otherwise, identify the
number as a fax number, used primarily for sending and receiving
faxes.
