Canon Mk1500 User Manual Download Page 88 | Manualshive

Page: 88 / 119

Canon Mk1500 User Manual Download Page 88

84

4.5

Other Operations

Removing the print media

When changing the print media from tube to label tape, or from label tape to tube, it is necessary to take out the
media that is currently set in the printer. However, because the printer feeds tube or label tape into its transport
rollers, it is not possible to simply pull out the current media. It is

fi

rst necessary to perform the operation

described below to release the tube or label tape that has been fed into the unit.

These operations are the same for heat shrink tube, wrap around tape, 4mm I.D. strip, and clear tube.

1

Press

[Remove].

A confirmation display appears.

•

2

Press

[Enter].

The display at right appears, and the tube or label tape is released
by the transport rollers.

After pressing [Enter], use the feed function if the tube or label is not released from the
transport roller (unable to remove) even after the printer has stopped. (“When a Tube or
Label Tape is Not Ejected/Fed” (

page 94))

•

3

Open the cover.

4

(Tube only) Pull the tube out of the tube attachment.

«
...
86
87
88
89
90
...
»

Summary of Contents for Mk1500
























































































































Reviews:

No comments